Address
A & H Pest Control
The Berries
Yester Rd
BR7 5LT
020 8295 3402
Maintenance & Inspection of Bird Control Systems
Well-designed bird control is largely fit-and-forget, but a light inspection routine keeps everything tight, discreet and effective. This guide explains how to maintain bird control systems — netting, post-and-wire, spikes, solar panel mesh, vent guards and eaves sealing — and sets out practical checks for homes and commercial sites. If you prefer, A&H can add these checks to your roof or façade maintenance schedule across London & Southern England.
Why inspection matters (even for robust systems)
Weather, adjacent works and minor building movements can loosen fixings over time. A brief check catches tiny issues before birds exploit them. The goal isn’t constant maintenance; it’s quick, periodic assurance that your investment keeps performing.
Maintenance routines by system type
Each system has different checkpoints. The following guidance keeps performance high with minimal effort.
Bird netting
Look for even tension, intact mesh and secure perimeter fixings. Corners and door zips are the first to show wear. Check after storms and any rooftop works. Re-tensioning is quick when caught early.
Post-and-wire
Wires should be taut; posts should be vertical and secure. If wires slacken, birds can balance between runs. A simple re-tension brings performance back to 100%.
Stainless spikes
Confirm edge-to-edge coverage remains intact. Replace any displaced sections (often moved during signage or window cleaning). Ensure adhesives are sound on sun-exposed edges.
Solar panel mesh
Verify clips are tight and mesh sits flush with no corner gaps around rails, isolators or cable routes. Clear leaves and wind-blown debris that might rest against the skirt; the mesh itself needs little attention.
Vent guards & eaves sealing
Confirm vent flaps move freely and grilles aren’t clogged. Look along soffit lines for daylight at joints after high winds; reseal fine cracks to maintain a continuous barrier without blocking ventilation.
Suggested inspection schedule (residential & commercial)
A simple schedule avoids surprises. Adjust frequency for coastal/high-exposure sites.
- Spring check (pre-nesting): Confirm systems are tight before pressure builds.
- Post-storm check: Wind and debris are when slack wires or dislodged spike sections appear.
- Autumn check: After leaf fall, clear gutters and confirm mesh and outlets are free-flowing.
- After adjacent works: Signage changes, window cleaning, roof repairs — do a quick pass to ensure nothing was lifted.
Cleaning and care without damaging systems
Avoid aggressive scraping near fixings. For façades, use appropriate brushes and low-pressure rinses around nets and wires. On plant decks, coordinate with maintenance teams so zipped net access panels are opened and closed properly. For solar arrays, use panel-safe cleaning practices; never pry at the mesh skirt.
When to call A&H for a service visit
If you notice sagging netting, slack wires, lifted spike sections, panel mesh gaps, or cracks along eaves joints, a quick service visit restores full performance. Repairs are typically fast and low-cost when caught early.
Integrating bird control checks into your PPM (commercial)
Facilities teams can add bird control inspection to planned preventive maintenance with simple line items: net tension check, wire re-tension if needed, spike continuity, vent/soffit visual, solar mesh perimeter. We can provide a brief checklist and train teams to spot early signs.
Warranty notes and record-keeping
Keep a basic log of install date, system type, and any service visits. Photos during inspections help track changes. Good records support warranties and make future adjustments straightforward.
Common pitfalls that shorten system life
- Letting nets sag without a quick tension tweak
- Using harsh chemicals that degrade adhesives or plastics
- Blocking vents instead of fitting proper grilles
- Drilling solar frames (voids warranties) rather than using clip-on mesh
- Ignoring small daylight gaps at soffit corners after storms
Most issues are avoidable with quick visual checks and timely, simple fixes.
Our maintenance support options
We can schedule annual or seasonal inspections, bundle checks with other roofline services, and carry spare clips, wire crimps and spike sections for same-visit fixes. You’ll get a brief report, photos and clear recommendations.
Ready to keep your bird control in top shape?
If you want your systems to stay discreet and effective for years, a light inspection routine is all it takes. A&H can handle it for you or provide a checklist for your team. Call 020 8295 3402 to book a visit or add inspections to your PPM plan.
What Customers say about us
A small sample of the 100’s of positive reviews we have received recently, see here for all our online reviews.
“My second time using...was delighted with the work then,.. for the second set of panels we had installed last week....The quality of work was just as high...great customer service..Friendly, professional...tidy and fast .. and the product is the best quality I've seen...Would highly recommend!”
M Bulle
“Pigeon guard around the solar panels...Mark and Colin are a very professional team.... with years of experience and a well designed proven solid solution....cleaning out a nest to cleaning the panels..clearing up perfectly afterwards...fitting a solid 3mm mesh around the panels...pigeon problem is solved...very good competitive value”
M Bartlett
“Pigeons..under our solar panels, from the moment we found them on the internet...we received the best possible service...advice...brilliant.”
G Peppiatt
Other Services
As well as Solar Panel Proofing, we offer a range of other services…
Any Pest Problem Contact us Now!
We are waiting to help with any Pest Problem you may have
